CNB ID2810PVF - Manual (Page 35)

XNET Network Dome Camera User’s Guide
5.10. Upgrade & Reset
You can upgrade the XNET/XNET-Wireless via the IP network.
Figure 5-14. Upgrade & Reset
For each of the upgrade of the system component, upgrade code should be downloaded from
cnbtec’s home page before the system upgrade is performed.
(Refer to
[6.4. How to Upgrade Your XNET/XNET-Wireless System]
Field/Button
Sub Field
/Button
Description
Automatic
Upgrade
Automatic upgrade is a feature that enables network
camera to upgrade to newly released system software by
automatically connecting to upgrade server. Click on check
button to find the availability of upgrade firmware.
Note that automatic upgrade is not supported for this
product
.
Upgrade the system manually. Manual
Upgrade
System S/W
Upgrade
Upgrade the system software installed in the network
camera via the network. System software needed for the
upgrade can be downloaded from cnbtec’s home page.
35 of 44