CTI Products TSAM Transmitter Steering & Audio Matrix - Manual (Page 51)

TSAM Installation and Maintenance Rev. 2.10 Chapter 5
CTI Products, Inc. Setting Programmable Options
43
5.6.1 Multicast Menu
The Multicast menu is entered with the M command from the main menu:
Main Menu Commands:
A Edit High Level Guard Tone Parameters
F Fetch Defaults
M Edit Multicast Parameters
N Edit Function Tone Parameters
R Edit Repeater Keying Options
S Edit Secondary Operation
T Edit Transmitter Steering Options
X Edit Expansion and Home Transmitter Parameters
H or ? Help
Q Quit
: M
Edit Multicast Transmitter Selection
EA Enable All Transmitters
EI Enable Individual Transmitters by TX number
DA Disable All Transmitters
DI Disable Individual Transmitters by TX number
L List Enabled Transmitters
Q Quit Multicast Selection
(EA/EI/DA/DI/L/Q)? -->
The individual commands shown in the Multicast Menu will be covered below.
Changes made while in this menu or its sub-menus will not be saved in EEPROM until you Quit this menu
and perform a Write command.