Q: quitting the multicast menu, 7 q: quitting the multicast menu – CTI Products TSAM Transmitter Steering & Audio Matrix User Manual
Page 57
Advertising
TSAM Installation and Maintenance Rev. 2.10
Chapter 5
CTI Products, Inc.
Setting Programmable Options
49
5.6.7
Q: Quitting the Multicast Menu
Use the Q (Quit) command to exit from the Multicast programming menu. You will be asked if you want
to write the changes to EEPROM or if you want to Abort.
Edit Multicast Transmitter Selection
EA Enable All Transmitters
EI Enable Individual Transmitters by TX number
DA Disable All Transmitters
DI Disable Individual Transmitters by TX number
L List Enabled Transmitters
Q Quit Multicast Selection
(EA/EI/DA/DI/L/Q)? -->
: Q
Finished.
Write changes to nonvolatile or Abort (W/A)? (W) W : W
Advertising