CTI Products TSAM Transmitter Steering & Audio Matrix - Manual (Page 62)

TSAM Installation and Maintenance Rev. 2.10 Chapter 5
CTI Products, Inc. Setting Programmable Options
54
5.9 Expansion and Home Transmitter Parameters
:X
Expansion & Home Transmitter Parameters:
To accept (DEFAULT) value: type <d> or <D>.
To accept CURRENT value: type <return>.
To change: type desired value then <return>.
Number of Expansion TSAM boards present (max = 7) = (0) 0 : 1
HOME A Transmitter = (1) 1 : 1
HOME B Transmitter = (2) 2 : 2
Finished.
5.9.1 Expansion Units
Enter the number of expansion units connected to the Master TSAM. A maximum of 7 expansion units
can be connected, for a total of 64 transmitters.
5.9.2 Home Transmitter Selection
The TSAM allows the designation of two home transmitter sites. The home transmitter site are used when
the current steered site is disabled by selecting it for secondary operation. When this occurs, the TSAM
steers to site A if it is available. If site A was the site selected for secondary operation, the TSAM then
steers to home site B.