CTI Products TSAM Transmitter Steering & Audio Matrix - Manual (Page 77)

TSAM Installation and Maintenance Rev. 2.10 Chapter 8
CTI Products, Inc. Maintenance Theory
69
8.4 Option Jumpers
In most instances the TSAM is shipped from the factory with all of the necessary jumper options preset.
You should refer to the factory jumper table and verify that the proper options for you system have been
selected. Most jumpers can either be accessed by removing the front panels or rear cover plate. This
allows changes to be made without removing the TSAM from its rack mounted position. Some jumpers
can only be accessed with the TSAM top cover removed. In particular, the 10K or 600
Ω impedance
jumper on each audio input require removal of the top cover. Set these jumpers before mounting the
TSAM.