Aastra Telecom SISIP 57I CT - Manual (Page 159)

Operational Features
41-001160-00, Rev 01 Release 2.0 5-31
Operational IP Phone Features
Operational IP Phone Features 57i Cordless (CT) Feature Keys
In addition to the softkeys on the 57i CT, this phone also has handset keys you can
configure with specific features. You can use the Aastra Web UI to configure the
handset keys.
You can program up to 15 feature keys on the 57i CT handset with specific
functions using the Aastra Web UI.
The following table identifies the functions available for all 15 handset keys and
the default functions for each key.
Note: You configure the handset keys using the Aastra Web UI
(Operation->Handset Keys) or by pressing the "F" button on the
handset.
Key Function Description Default for:
Line 1 Line 1 key - Selects line one Handset Key 1
Line 2 Line 2 key - Selects line two Handset Key 2
Line 3 Line 3 key - Selects line three Handset Key 3
Line 4 Line 4 key - Selects line four Handset Key 4
Icom Intercom key – Enter handset list to select handset to call Handset Key 5
Dir Directory key – Activate directory feature Handset Key 6
Callers Callers key – Activate callers feature Handset Key 7
Xfer Transfer key - Activate transfer feature Handset Key 8
Conf Conference key - Activate conference feature Handset Key 9
Public Public key – Toggle between public & private call mode Handset Key 10
None No function is selected – this key is empty, no label. Handset Key 11 and 12
Line 5 Line 5 key (if available) - Selects line five. Handset Key 13
Line 6 Line 6 key (if available) - Selects line six. Handset Key 14
Line 7 Line 7key (if available) - Selects line seven. Handset Key 15
Line 8 Line 8 key (if available) - Selects line eight
Line 9 Line 9 key (if available) - Selects line nine