Aastra Telecom SISIP 57I CT - Manual (Page 39)

Aastra Web UI
41-001160-00, Rev 01 Release 2.0 2-13
Configuration Interface Methods
Configuration Interface Methods Basic Settings
The Basic Settings section provides the following options:
Advanced Settings
The Advanced Settings section provides the following options:
Heading Description
Preferences Allows you to set General specifications on the IP phone
such as, local dial plan, dial plan terminator, digit timeout,
park and pickup call settings, and enable/disable suppress
DTMF playback, display DTMF digits, play call waiting tone,
and stuttered dial tone. This section also allows you to set
intercom settings, map conference and redial keys, set ring
tones, set priority alerts, enable directed call pickup, set
time/date settings, and load language packs.
Call Forward Allows you to set a phone number destination for where you
want calls forwarded.
Heading Description
Network Allows you to set basic network settings such as, DHCP, IP
address, DNS, Ethernet Port 0 and Port 1, and advanced
network settings such as, Network Address Translation
(NAT), time servers, and enable/disale HTTPS. The
Network subcategory also allows you to set Type of Service
(ToS)/Differentiated Services Code Point (DSCP), and
VLAN settings.
Global SIP Allows you to set basic and advanced global SIP settings,
and Real-time Transport Protocol (RTP) settings that apply
to all lines on the IP phone.
Lines 1 through 9 Allows you to set SIP authentication settings, SIP network
settings, and RTP settings to use on a specific line.
Action URI Allows an administrator to specify a uniform resource
identifier (URI) that triggers a GET when certain events
occur.
Configuration Server Allows you to set the protocol to use on the configuration
server (TFTP (default), FTP, HTTP, or HTTPS), configure
automatic firmware and configuration file updates, enable/
disable auto-resync, and assign an XML push server list.