Operational ip phone features – Aastra Telecom SISIP 57I CT User Manual
Page 272
Operational Features
5-144
41-001160-00, Rev 01 Release 2.0
IP Phone Administrator Guide
Operational IP Phone Features
Aastra Web UI
Outgoing intercom settings (55i, 57i anc 57i CT only):
1
Click on Basic Settings->Preferences->Outgoing Intercom Settings.
2
Select an Intercom type for outgoing Intercom calls from the Type list box.
Valid values are Phone-Side, Server-Side, Off. Default is Off.
3
If Server-Side is selected, enter a prefix to add to the phone number in the "Prefix Code" field.
Note: For Sylantro servers, enter *96.
4
If Phone-Side or Server-Side is selected, select a line from the Line list box for which you want the IP
phone to use as its configuration on the Intercom call.
Note: The IP phone uses the configuration from the line you select from this list box. The call itself is
made using the first available line at the time of the call.
5
Click
to save your changes.
You must restart your IP phone for the changes to take affect.
6
Click on Operation->Reset.
7
In the "Restart Phone" field click
to restart the IP phone.