Aastra Telecom SISIP 57I CT - Manual (Page 247)

Operational Features
41-001160-00, Rev 01 Release 2.0 5-119
Operational IP Phone Features
Operational IP Phone Features Enabling/Disabling a Beep for Status Message Displays
You can enable or disable a BEEP option using the Status Message object
(AastraIPPhoneStatus), the configuration files, or the Aastra Web UI.
When the phone receives a status message, the BEEP notifies the user that the
message is displaying.
You can use the following to enable/disable a status message beep:
• AastraIPPhoneStatus object (via XML object; see Appendix G )
• xml beep notification (via configuration files)
• XML Beep Support (via the Aastra Web UI)
Enabling the beep is an indication to the phone to sound a beep when it receives
an AastraIPPhoneStatus object. If you disable the beep, or no
AastraIPPhoneStatus object appears in the status message, then the default
behavior is no beep is heard when the object arrives to the phone.
The value set in the configuration files and Aastra Web UI override the attribute
you specify for the AastraIPPhoneStatus object.
For example, if the AastraIPPhoneStatus object has the attribute of Beep=”yes”,
and you uncheck (disable) the “XML Beep Support” in the Aastra Web UI, the
phone does not beep when it receives an AastraIPPhoneStatus object.
Setting the BEEP option in the configuration files and the Aastra Web UI applies
to the phone immediately.
Note: For enabling/disabling a status message beep using the Status
Message object, see Appendix G, “Creating an XML Application.”