Aastra Telecom SISIP 57I CT - Manual (Page 381)

Operational, Basic, and Advanced Parameters
41-001160-00, Rev 01 Release 2.0 A-39
Configuration Parameters
Appendix A
Parameter –
sip dial plan terminator
Send Dial Plan Terminator
(in Web UI)
Aastra Web UI Basic Settings->Preferences
Configuration Files aastra.cfg, <mac>.cfg
Description The IP phone allows the configuration of a dial plan terminator. When
you configure the IP phone to use a dial plan terminator or timeout (such
as the pound symbol (#)) the phone waits 4 or 5 seconds after you pick
up the handset or press a key to make a call.
Format Boolean
Default Value 0
Range "0" - Disable
"1" - Enabled
Example sip dial plan terminator: 1
Parameter –
sip digit timeout
Digit Timeout
(in Web UI)
Aastra Web UI Basic Settings->Preferences
Configuration Files aastra.cfg, <mac>.cfg
Description Represents the time, in seconds, to configure the timeout between
consecutive key presses.
Format Integer
Default Value 4
Range Not Applicable
Example sip digit timeout: 6