Aastra Telecom SISIP 57I CT - Manual (Page 583)

How to Create an XML Application
41-001160-00, Rev 01 Release 2.0 G-43
Creating an XML Application
Appendix G LockIn Attribute
(configurable via XML objects only)
The XML “LockIn” attribute allows you to specify whether or not the
information on the LCD screen stays displayed when other events occur (such as
pressing buttons on the keypad).
You must use the “LockIn” aattribute in the ROOT. The settings for the LockIn
attribute are “Yes” for enabled, and “No” for disabled.
XML Example:
The following example illustrates the use of the “LockIn” attribute with the
AastraIPPhoneFormattedTextScreen object. The result would cause the LCD
screen to lock in the display of the XML information even if other events occur
(except for an incoming call).
<xs:element name="AastraIPPhoneFormattedTextScreen">
<xs:attribute name="Beep" default="no">
<xs:simpleType>
<xs:restriction base="xs:string>
<xs:pattern value="yes|no"/>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
<xs:attribute name="DestroyOnExit" default="no">
<xs:simpleType>
<xs:restriction base="xs:string>
<xs:pattern value="yes|no"/>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
<xs:AastraIPPhoneFormattedTextScreen LockIn= “yes” default="no">
<xs:simpleType>
<xs:restriction base="xs:string>
<xs:pattern value="yes|no"/>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
Note: This attribute is ignored during incoming calls. If this attribute is
set, and the phone receives an incoming call, the LCD screen exits the
XML information and displays the information about the incoming call.