Aastra Telecom SISIP 57I CT - Manual (Page 209)

Operational Features
41-001160-00, Rev 01 Release 2.0 5-81
Operational IP Phone Features
Operational IP Phone Features
5 In the "Value" field, enter the approriate value based on the server in your network.
Note: For values to enter in this field, see the table “Park/Pickup Call Server Configuration Values”
on page 5-74 .
6 In the "Line" field, select a line for which to apply the Park configuration.
7 The park softkey has a default state of “Connected”.
Leave this state enabled or to disable, uncheck the check box.
8 Pick a softkey to configure for Picking up a call.
9 In the "Type" field, select Pickup.
10 In the "Label" field, enter a label for the Pickup softkey.
11 In the "Value" field, enter the approriate value based on the server in your network.
Note: For values to enter in this field, see the table “Park/Pickup Call Server Configuration Values”
on page 5-74 .
12 In the "Line" field, select a line for which to apply the Pickup configuration.
13 The pickup softkey has a default state of “Idle” and “Outgoing”.
Leave these states enabled or to disable, uncheck the check boxes.
14 Click to save your changes.
You must restart your IP phone for the changes to take affect.
15 Click on Operation->Reset.
16 In the "Restart Phone" field click to restart the IP phone and apply the changes.
For the 57i CT Handset:
Aastra Web UI