Operational ip phone features – Aastra Telecom SISIP 57I CT User Manual
Page 186
Operational Features
5-58
41-001160-00, Rev 01 Release 2.0
IP Phone Administrator Guide
Operational IP Phone Features
7
Select a softkey or programmable key to configure.
8
In the "Type" field, select "BLF" (Asterisk), "BLF\List" (BroadSoft BroadWorks).
9
For the 55i, 57i, and 57i CT softkeys:
In the "Label" field, enter the name of the person who’s extension you are monitoring (if “Type” is
BLF).
Note: If BLF\List type is selected, no label value is required. The BroadWorks BLF List name is
configured in the "BLF List URI" field instead.
10
In the "Value" field, enter a value to associate with the softkey or programmable key.
For example, for BLF, the value is the extension you want to monitor.
For BLF\List, the value is an identifier for the list of numbers you are monitoring.
11
Click
to save your changes.
12
In the "Line" field, select a line number that is actively registered to the appropriate SIP proxy you are
using.
13
In the "BLF List URI" field, enter the name of the BLF list defined on the BroadSoft BroadWorks
Busy Lamp field page for your particular user.
For example, [email protected].
Note: The value of the BLF\List URI parameter must match the list name configured. Otherwise, no
values display on the 57i screen and the feature is disabled.
14
Select the line state (idle, connected, incoming, outgoing, busy) that you want to apply to the BLF
softkey or programmable key.
15
Click
to save your changes.
Aastra Web UI