Incoming intercom calls, Configuring intercom calls and auto-answer, Operational ip phone features – Aastra Telecom SISIP 57I CT User Manual
Page 271
Operational Features
41-001160-00, Rev 01 Release 2.0
5-143
Operational IP Phone Features
Operational IP Phone Features
Incoming Intercom Calls
On incoming intercom calls, you can enable (turn ON) or disable (turn OFF) the
microphone on the IP phone. You can also enable or disable “Auto-Answer” and
“Play Warning Tone” for incoming intercom calls. By default, auto-answer, the
microphone, and playing a warning tone are all enabled for incoming intercom
calls.
Configuring Intercom Calls and Auto-Answer
You can configure the Intercom feature and auto-answer using the configuration
files or the Aastra Web UI.
Use the following procedures to configure Intercom calls and auto-answer on the
IP phone.
Note:
An administrator can configure the incoming and outgoing
Intercom feature. A user can configure the incoming Intercom feature
only.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
on