Aastra Telecom SISIP 57I CT - Manual (Page 468)

Hard Key Parameters
A-126 41-001160-00, Rev 01 Release 2.0
IP Phone Administrator Guide
Appendix A
Handset Feature Key Settings for the 57i CT
Parameter –
featurekeyN type
Type
(in Web UI)
Aastra Web UI Operation->Handset Keys
Configuration Files aastra.cfg, <mac>.cfg
Description The type of feature key to configure. Valid types are:
•
none - Indicates feature key is disabled.
• line - Indicates the feature key is configured for line use.
• transfer- Indicates feature key is configured for transferring a call.
• conference - Indicates feature key is configured for conference
calling.
• public - Indicates feature key is configured to toggle from public to
private mode. A public and private softkey can be used when at a line
item in the Directory List. The Private key toggles a number in the
Directory List to private. The Public key allows a number in the
Directory List to be sent to the handsets. A 57i CT accepts a
maximum of 50 entries with the public attribute.
• intercom - Indicates the feature key is set to be used to make an
intercom call.
• directory - Indicates the feature key is set for accessing the Directory
List.
• callers list - Indicates the feature key is set for accessing the Callers
List.
• park- Indicates the feature key is configured to park incoming calls
when pressed.
• pickup- Indicates the feature key is configured to pick up parked calls
when pressed.
• flash - Indicates the feature key is set to generate a flash event when
it is pressed on the 57i CT handset. The IP phone generates flash
events only when a call is connected and there is an active RTP
stream (for example, when the call is not on hold).
Format Text
Default Value None