Perma Pure RATAMATION V2.0 - Manual (Page 23)

RATAmation v2.0 User Manual Perma Pure LLC
Phone (732) 244-0010
www.permapure.com
Sept. 2012 21
Manual Gas Control
“Manual Gas Control” is a screen used to control the cal gas valves of the flow drawer. (Figure
17)
Open this screen from the Main Menu by selecting the ‘Manual Control’ menu item and then
selecting ‘Manual Gas Control’ from the submenu.
This screen can also be opened from the Main screen by clicking the ‘Gas Control’ button just
below the menu bar.
Figure 17
This screen displays all 14 calibration gases labeled as CG 1 though 14 even if no configuration
has been entered for the cal gas. The divided gases labeled DG 1 through 28 will only be
displayed if there at least 1 component gas set.
The available cal gases are displayed in a list containing the Cylinder ID and up to 4 component
gases showing type and quantity.
If no cal gas flowing, selecting a line of the list will highlight the cal gas.
Click on either ‘Direct Gas ON’ button to supply cal gas directly to the analyzer or ‘System Gas
ON’ button to supply cal gas to the system.
The gas should begin flowing within a second, with any delay due to communication to the flow
drawer.