Perma Pure RATAMATION V2.0 - Manual (Page 25)

RATAmation v2.0 User Manual Perma Pure LLC
Phone (732) 244-0010
www.permapure.com
Sept. 2012 23
Analog Input (Analyzer) Configuration
“Analog Input Configuration” is a screen to define the inputs to the flow drawer. (Figure 18)
Open this screen from the Main Menu by selecting the ‘Configuration’ menu item and then
selecting ‘Analyzer Set Up’ from the submenu.
Figure 18
This screen will allow configuration of up to 12 analog inputs labeled as Chan 1 though 12
(abbreviation for channel).
Chan 1 through 8 can be configured as ‘Analyzers’ for use in testing.
Chan 1 through 12 can be configured as ‘Other Data’ for additional information or data for the
test.
Only Chan 1 through 8 inputs that are configured as ‘Analyzer’ will be displayed on the Error
Calibration and the Pre/Post Calibration screens. All of the inputs that are configured for use,
either ‘Analyzer’ or ‘Other Data’, will be displayed on the Run, Live Data and Graph displays.