Perma Pure RATAMATION V2.0 - Manual (Page 54)

RATAmation v2.0 User Manual Perma Pure LLC
Phone (732) 244-0010
www.permapure.com
Sept. 2012 52
APPENDIX
Ethernet Communications Configuration
Install RATAmation software onto the computer. Put the supplied software Crypto-Key in any USB port.
Your computer should recognize the key device and show up as ‘CBUSB’ if the computer is seeing it.
The software for the key should install automatically. There is nothing else that needs to be done with the
key.
1. If you are connecting a Model 4P-4300 Flow Control Drawer (FCD) to a computer that is on a
network with a DHCP server, the TCP/IP settings on the computer AND the flow control drawer
must be set so that they are obtained automatically. For direct connection of the computer to the
4300FCD, skip to step 2.
a. Turn off Windows Firewall until communications have been established.
b. To set the computer’s TCP/IP settings to automatic, go to Start, Select Control Panel,
select Network and Sharing Center, in the upper left corner select Change Adapter
Settings and a window will open displaying your network connections. Right click on
local area connection and select Properties. A dialogue box will open. Select Internet
Protocol Version 4 (TCP /IPv4) and click on the Properties button. Another dialogue
box window will open.
c. There are two selection points. Select them both to so that the IP address and the DNS
Server are selected automatically as in the screen shot below. Click OK and close out
of all windows.
d. On the RATAmation software disc there is a program called SetupNE3.exe. Click to
install and follow directions to complete installation.