Bosch MUMXL10T Kitchen machine MaxxiMUM User Manual

Page 18

Advertising
background image

18

Robert Bosch Hausgeräte GmbH

Cleaning and user maintenance shall not be made by children without

supervision.

Connect and operate the appliance only in accordance with the speci-

fications on the rating plate. Only use indoors. Do not use the appli-

ance if the power cord and/or appliance are damaged.

Always disconnect the appliance from the supply if it is left unattended

and before assembling, disassembling or cleaning.

Do not place the power cord over sharp edges or hot surfaces.

To prevent injury, a damaged power cord must be replaced by the

manufacturer or his customer service or a similarly qualified person.

Only our customer service may repair the appliance.

,

Safety instructions for this appliance

Risk of injury

Risk of electric shock!

Do not insert mains plug until all preparations for working with the

appliance are complete.

Never immerse the base unit in liquid or hold under running water.

Do not use a steam cleaner.

Do not adjust swivel multi-function arm while the appliance is switched

on. Wait until the drive has come to a standstill.

Do not change tool/accessory until the drive is at a standstill – when

the appliance is switched off, the drive continues running briefly.

Use only the rotary switch to switch the appliance on or off.

When the appliance is not in use, pull out the mains plug.

Before eliminating a fault, pull out the mains plug.

Risk of injury from the rotating tools!

While the appliance is operating, never place fingers in the mixing

bowl. Attach the cover (12) before operating the appliance!

Keep hands clear of rotating parts.

Do not change tools until the drive has come to a standstill – when

the appliance is switched off, the drive continues running briefly

and stops in the tool change position/„Easy fill“-position.

Do not move multi-function arm until the tool is at a standstill.

Do not switch on the appliance until the blender has been screwed

in all the way and the tool drive cover (7) has been attached.

Cover unused drives with drive covers.

Risk of injury from sharp blades!

Do not touch blender blades with bare hands. Clean them with a brush.

Risk of injury from sharp blades/rotating drive!

Never place fingers in the attached blender! Do not remove/attach

the blender until the drive is at a standstill! Operate the assembled

blender only and with the lid attached.

en

Advertising