Teledyne 9060L - Zirconium oxide flue gas oxygen analyzer - Manual (Page 45)

Percent Oxygen Analyzer Appendix
Teledyne Analytical Instruments 45
Notes:
1. Care must be taken to avoid contact with explosive or
inflammable gases with 9060L heated probes when hot.
2. Please contact factory for corrosives other than sulphur or zinc.
We can provide test materials to try in your atmosphere.
A.3 Spare Parts List
QTY. P/N DESCRIPTION
1 B-76751A PC Board, Main
1 B-76513A PC Board, Power Supply
2 F-1296 Fuse (AC), 2A, 250VAC, IEC Type T,
5x20mm
1 --- Oxygen Probe (call TI/AI to specify U
Length)
1 B77926A Cable Assembly, Probe Heater
1 B77926B Cable Assembly, Remote Probe
Note :Orders for replacement parts should include the part
number and the model and serial number of the system for
which the parts are intended.
Send orders to:
TELEDYNE INSTRUMENTS
Analytical Instruments
16830 Chestnut Street
City of Industry, CA 91749-1580
Telephone: (626) 934-1500
Fax: (626) 961-2538
Web: www.teledyne-ai.com
or your local representative.
Email: [email protected]