Reese 37152 MULTI-FIT RECEIVER - Manual (Page 2)

SIDE BRACKET LOCATION 1.
1/2” KNURL NECK BOLT
1/2 LOCK WASHER
1/2 HEX NUT
SIDE BRACKET LOCATION 2.
1/2” KNURL NECK BOLT
1/2 LOCK WASHER
1/2 HEX NUT
1. Loosely install Side Brackets on vehicle per specific instructions.
Align holes in side plate with side bracket as shown.
2. Install the 1/2” Knurl neck bolts, 1/2 lock washers, and 1/2 hex nuts.
3. First - Tighten Knurl neck bolts to 90 FT-LB to seat bolt, then loosen and
retighten to 75 FT-LB
4. Second - Tighten Side Bracket fasteners to proper specifications.
(Refer to general instructions on Page 1. for specs. )
5. Center receiver tube on vehicle and tighten center section fasteners to 75 LB-FT.
CENTER SECTION BOLTS
(Location varies per vehicle)
SIDE BRACKET
SIDE PLATE
BRACKET LOCATIONS
TOOLS REQUIRED
3/4"(19MM) SOCKET
SAFETY GLASSES
TORQUE WRENCH
CENTER SECTION BOLTS
(Location varies per vehicle)
SIDE PLATE
SIDE BRACKET
1. Loosely install Side Brackets on vehicle per specific instructions.
Align holes in side plate with side bracket as shown.
2. Install the 1/2” Knurl neck bolts, 1/2 lock washers, and 1/2 hex nuts.
3. First - Tighten Knurl neck bolts to 90 FT-LB to seat bolt, then loosen and
retighten to 75 FT-LB
4. Second - Tighten Side Bracket fasteners to proper specifications.
(Refer to general instructions on Page 1. for specs. )
5. Center receiver tube on vehicle and tighten center section fasteners to 75 LB-FT.
RECEIVER TUBE
RECEIVER TUBE