SKC DatraTrac 2000 for the AirChek 2000_3000 - Manual (Page 21)

19
Pump Scheduler Menus
File Menu
Open ......................opens a pump program previously saved to a PC
Save .......................saves a pump program to a PC
Print ........................ prints the pump program schedule displayed on the screen
Exit .........................exits the Pump Scheduler window
View Menu
History ..........................opens the SKC Pump History window
Real Time Monitor ......opens the SKC Real Time Monitor window
Scheduler Options .......opens the SKC Pump Program Sett ings window
Clock Resolution .........sets the clock resolution
Tools Menu
Clear History ................clears the pump history
Clear Schedule .............clears the programmed pump schedule
Compare Pump Clock/
PC Clock .....................opens the Date/Time Display window and allows
the pump and PC times to be synchronized
Program Edit Bar
The Program Edit Bar (Figure 16) sets an AirChek 2000/3000 pump program. A
program is set by adding the value of the Flow Rate, Start Date/Time, Stop Date/
Time, and Duration to the cells of the Program Edit Bar.
An AirChek 2000/3000 pump program contains the following sampling parameters:
Parameter Value
Rate ............................................fl ow rate in mL/min
Start Date ..................................start date of the program
Start Time .................................start time of the program
Stop Date ..................................stop date of the program
Stop Time .................................stop time of the program
Duration ...................................total run time of the program in days: hours:
minutes: seconds
To program the above parameters into the cells of the Program Edit Bar, click on
the various control butt ons (see page 18) that select the value of the parameters, then
click on the appropriate cell.
SKC Pump Scheduler Window
Figure 16. Program Edit Bar