SKC DatraTrac 2000 for the AirChek 2000_3000 - Manual (Page 31)

29
Add extra days to the program schedule
Click on the +Day butt on. This will add one day to the
Start Date and Stop Date in the Program Edit Bar. Click
on Insert to place the program into the Pump Program
Scheduler.
Repeat the procedure to add an additional day to the Pump Program
Scheduler until each day of the week has been entered.
Set the desired Run Time Options
Select Pump Sett ings from the Options menu and click on the desired Run Time
Options (see page 26).
Write the program to the pump
Click on the ToPump butt on. DataTrac 2000 will now write all steps
contained in the Pump Program Scheduler to the connected pump.
Save the AirChek 2000/3000 program to a PC
Select the Save command from the File menu. The program displayed
in the Pump Program Scheduler will be saved as a program fi le (.pgm). Programs
can be saved for future use or editing.
Print the AirChek 2000/3000 program
Select the Print command from the File menu; this command prints the contents of
the Pump Program Scheduler.
Erase the Pump Program Scheduler
Select Clear Schedule from the Tools menu; this will erase the Pump Program
Schedule displayed on screen and in the connected pump‘s memory.
Sample Program