SKC DatraTrac 2000 for the AirChek 2000_3000 - Manual (Page 6)

4
Connecting the Pump to a PC (Figure 1)
USB port on PC: Use the supplied adapter cable to connect the pump to the PC.
DataTrac 2000 has limited use without an active AirChek 2000/3000 pump connected
to the PC, however, a program can be set up and saved to a PC without a pump
connected to the PC.
First Time Connection
1. Connect the pump to a PC using the DataTrac adapter cable.
a. If a Found New Hardware Wizard window displays during connection,
follow this procedure:
i. Ensure the wizard wants to install software for “USB Serial Port.”
1. If the wizard wants to install any other software, cancel the wizard,
and connect the adapter cable to a different USB port.
ii. Select Install the software automatically (Recommended).
iii. Click Next.
iv. The installing USB Serial Port window will display. Installation may
take several minutes. Do not press any keys during installation.
v. The Completing the Found New Hardware Wizard window will
display, indicating a successful installation.
vi. Click Finish to close the wizard.
2. Activate the pump LCD by pressing any button on the pump keypad.
3. Launch DataTrac Software on the PC by double-clicking the
AirChek 2000 shortcut icon on the PC desktop.
4. The AC 2000 Connection window will display (Figure 2).
a. Click Connect to Pump
DataTrac 2000 Setup
Shortcut icon
on desktop
Figure 1. Hardware Setup
AirChek 2000 Model 210-2002 Serial No. 00000 U.S. Patent # 5,892,160 SKC Inc., Eighty Four
, P
A 15330
Battery Pack P20136 4.8V, 2.0Ah
Use only SKC specified chargers.
For NiCad disposal Send only to approved sites or return to SKC
SKC Inc. Eighty Four, PA 15330 USA
W A RNING: Keep covers closed & do not connect to charger or data port in hazardous locations. Substitution of components may impair intrinsic safety . Intrinsically safe portable air sampling pump for use in hazard- ous locations: Class I Group
A, B, C & D; Class II Group F
& G, Group
E with US UL
only; and Class III when used with
SKC Battery Pack Part NO. P20136. T e mperature Code T3C. Listed 124U
C
US
Adapter cable
Pump interface port