SKC DatraTrac 2000 for the AirChek 2000_3000 - Manual (Page 38)

36
Setup Files
The Sample Sheet Setup window contains a list of information (in data cells) that will
be printed in a report. The Sample Sheet Setup window can be saved to a PC as a
setup fi le (.stp). A setup fi le consists of all the information contained in all data cells.
Enter Data into Sample Sheet
To enter the information into the data cells, click on the cell then type the data
using a keyboard.
Save Setup
To save all entered data, select the Save Setup command from the File menu. The
Save Setup command saves all data as a setup fi le (.stp).
The default extension .stp is used to indicate an AirChek 2000/3000 setup fi le.
Template Files
The Sample Sheet Setup window can also be saved to a PC as a template fi le (.tpl).
A template file reduces the need to repeatedly type data that rarely changes.
A template fi le contains only the information included in the data cells that have
an active check-box (the small square button before the data cell as shown in
Figure 40). To activate a check-box, click on it.
Save Template
To save only the information contained in data cells with active check-boxes, select
the Save Template command from the File menu. The Save Template command
saves the checked data as a template fi le (.tpl).
The default extension .tpl is used to indicate an AirChek 2000/3000 template fi le.
Print Sample Setup
To print the sample setup or template displayed on screen, select the Print Setup
command from the File menu.
Reports
Figure 40.
Close-up of the Sample Sheet
Setup Window Showing Active Check-boxes