SKC DatraTrac 2000 for the AirChek 2000_3000 - Manual (Page 29)

27
SKC Pump Program Settings Window
Buttons Functions
User Lock Out ......................click on Yes to activate or No to deactivate; User Lock Out
will prevent anyone from altering the pump operating
parameters even if the security code is entered on the
pump keypad. However, the operator will be able to
scroll through the data display.
Temp Units ...........................click to select Fahrenheit or Celsius scale.
Pressure Units ......................click to select Inches Hg, millibars, or mm Hg scale.
Reset Volume, Time,
Temps, Pressures .................click on Yes to activate or No to deactivate; Yes will
reset the accumulated volume pumped, time duration,
minimum and maximum temperatures, and pressure
data to zero (0).
Clear History ........................click on Yes to activate or No to deactivate; Yes will reset
the AirChek 2000/3000 pump history. In general, it is
good practice to clear the history before running a new
schedule.
To set the values and return to the previous window, click the OK butt on.
All activated options will take eff ect when the To Pump butt on (Figure 18) is
clicked. The ToPump butt on sends the information in the Pump Program Scheduler
(Figure 17) to the pump.