SKC DatraTrac 2000 for the AirChek 2000_3000 - Manual (Page 24)

22
Open Program
To open a previously saved program, select the Open command from the File menu.
Print Program
To print the Pump Program Scheduler displayed on the screen, select the Print
command from the File menu.
New Value Button
The New Value butt on (Figure 21) sets the fl ow rate of the pump.
Button Function
New Value ............................opens the Scheduler Set Flow
window
(Figure 22)
Scheduler Set Flow Window
The Scheduler Set Flow window (Figure 22) selects the fl ow rate
using the numbered fl ow butt ons and the scroll bar.
Set Flow Rate
To set the fl ow rate, click on the desired fl ow rate
butt on. The new fl ow rate appears in the display cell.
Scroll Bar
To increase or decrease the displayed rate, use the
scroll bar.
Enter Flow Rate
To enter the displayed fl ow rate into the Flow Rate
cell of the Program Edit Bar, click on OK.
Previous Button
To reset the displayed fl ow rate to the previously set
pump fl ow rate, click on the Previous butt on.
Calendar
The Calendar (Figure 23) shows the 28-day time interval over which the pump can be
programmed. The pump can only be programmed within a 28-day time interval. Use
the Calendar to select the Start and Stop Dates that appear in the Program Edit Bar.
Selecting a Date
To select a date, click on it then click on the Start
or Stop Date cell in the Program Edit Bar to enter
it into that cell.
SKC Pump Scheduler Window
Figure 22.
Scheduler Set Flow Window
Figure 21.
New Value Button
Figure 23. Calendar