SKC DatraTrac 2000 for the AirChek 2000_3000 User Manual
Page 33
31
Example of an AirChek 2000/3000 History File Printout:
History Display
The History Display (Figure 36)
shows the record or history of
all operations performed by the
connected pump. A history will
remain on screen and in pump
memory until it is cleared. If more
than 40 history operations have occurred since history was cleared, they will roll
over in memory so that the last 40 will be displayed. A history includes the following
data:
Figure 36. History Display
Pump Mode
Operating State of the Pump
Flow ................................................. pump in constant fl ow
Hold ................................................. pump in HOLD
Flow Fault ....................................... fl ow fault occurred
Low Batt .......................................... batt ery depleted
Prog (Flow) ..................................... Pump in fl ow mode while running a program
Prog (Hold) ..................................... Pump in Hold mode while running a program
Prog (Sleep) ..................................... Pump on Sleep mode while running a program
User Setup ...................................... Pump’s user interface accesses and user adjusting pump
Flow Adjust .................................... Flow rate or fl ow correction of pump adjusted by user
~ continued on page 32 ~
SKC Pump History Window