IAI America ACON-SE User Manual
Page 13
3
Applicable Models of IAI’s Industrial Robots
Machines meeting the following conditions are not classified as industrial robots according to Notice of Ministry of
Labor No. 51 and Notice of Ministry of Labor/Labor Standards Office Director (Ki-Hatsu No. 340):
(1)
Single-axis robot with a motor wattage of 80 W or less
(2) Combined multi-axis robot whose X, Y and Z-axes are 300 mm or shorter and whose rotating part, if any,
has the maximum movement range of within 300 mm
3
including the tip of the rotating part
(3)
Multi-joint robot whose movable radius and Z-axis are within 300 mm
Among the products featured in our catalogs, the following models are classified as industrial robots:
1.
Single-axis ROBO Cylinders
RCS2/RCS2CR-SS8
whose stroke exceeds 300 mm
2.
Single-axis robots
The following models whose stroke exceeds 300 mm and whose motor capacity also exceeds 80 W:
ISA/ISPA, ISDA/ISPDA, ISWA/ISPWA, IF, FS, NS
3.
Linear servo actuators
All models whose stroke exceeds 300 mm
4.
Cartesian robots
5.
IX SCARA robots
All models whose arm length exceeds 300 mm
(All models excluding IX-NNN1205/1505/1805/2515, NNW2515 and NNC1205/1505/1805/2515)
Any robot that uses at least one axis corresponding to one of the models specified in Sections 1 to 3 and
also CT4