IAI America SSEL User Manual
Page 414
Advertising
392
Appendix
Note: If the actuator is of absolute specification, 1 (Select) cannot be selected for short-cut control and
thus rotation operation cannot be performed.
“Axis operation type,” “Mode selection for linear movement axis,” “Mode selection for rotational movement
axis,” “Short-cut control selection for rotational movement axis,” “Expression of current position (approx.),”
“Soft limit +,” “Soft limit -,” etc., are summarized in a table in Appendix, “Combination Table of SSEL
Linear/Rotary Control Parameters.” Use this table as a reference.
Advertising