Installing option modules, 3 installation procedure installing option modules, Figure 11 installing option modules – System Sensor PDRP-1002 User Manual
Page 22
Advertising
3 Installation Procedure
Installing Option Modules
22
The PDRP-1002 PN 51135:A 03/11/99
Installing Option Modules
Insert the two stand-offs (provided) into the holes located on the right-side edge of the
main board. Carefully align the pins on the main board with J1 and/or J2 on the option
board. Insert screw through the option board until it is secured on the stand-offs. Affix
the terminal identification labels provided with the option modules as shown below.
Figure 11 Installing Option Modules.
Option Board
(4XZM shown)
(Part # 42050)
Stand-offs)
Main
Board
4
XSTN
O
F
F
.c
d
r
4X
O
P
T
N
B
D
.c
dr
Advertising