Teledyne LeCroy WaveStation 3000 Operators Manual - Manual (Page 17)

Operator's Manual
Using the Keypad
This method is required to change the unit of measure associated with the parameter value.
1. Select the parameter from the option menu using the softkey button. The parameter will appear blue on
the Parameter menu and white on the Parameter Value list.
2. Press the keypad buttons to enter the new value. The display will change to show a menu of unit s of meas-
ure.
3. If desired, press the softkey to select a new unit of measure.You will return to the parameter menu.
4. Use the softkeys to select the next parameter to edit.
The Keypad is also used during Self Calibration and Self Test functions.
Using WaveStation Help
Onboard Help provides brief topics to guide you while using the system. To use the Help:
1. Press the Help function button on the Front Panel to open the Help menu. A list of topics appears on the
display.
2. Press the Up or Down softkey buttons to navigate the list.
3. When the desired topic is highlighted on the display, press the Select softkey to view it.
4. Press Done to return to the menu of Help topics, or Cancel to exit the Help menu.
922869 Rev B 11