Teledyne LeCroy WaveStation 3000 Operators Manual - Manual (Page 48)

WaveStation 3000 Function and Arbitrary Waveform Generator
Self Tests
These tests enable you to determine if the WaveStation controls are functioning properly. It is recommended
to perform them periodically. If you discover a malfunction during a test, contact your nearest
Teledyne
LeCroy service center for instructions. You may or may not need to return the product for repair .
Screen Test
This test enables you to check the color registration of the LCD.
1. Press the Utility function button.
2. Press the More softkey, then press Test/Cal.
3. Press SelfTest, then ScrTest. You will see the display change to red.
4. Following the directions on the display, continue to press the number 7 on the keypad to cycle through
red, green, and blue. Press the number 8 on the keypad to exit the test.
Key Test
This test determines if the WaveStation CPU is receiving proper input from the Front Panel controls.
1. Press the Utility function button.
2. Press the More softkey, then press Test/Cal.
3. Press SelfTest, then KeyTest. The display changes to show a simulation of the Front Panel.
42 922869 Rev B