Teledyne LeCroy WaveStation 3000 Operators Manual User Manual
Page 45
Advertising
Operator's Manual
6. On the Send Wave pop-up, choose the:
l
Target WaveStation from the Device List. All connected devices will appear for selection.
l
Store locationArb 1 or Arb2 (depending on the size of the file you're saving).
l
Name of the file.
l
Transfer channel. 512k files can only be sent over CH2.
Click Send.
A status message should appear indicating the read completed successfully.
NOTE: When you save a data file to a location already containing previously stored information, your new
information always overwrites the old. If you choose the wrong bank or transfer channel for the size of the
file, you'll see the following error message.
922869 Rev B
39
Advertising