Teledyne LeCroy WaveStation 3000 Operators Manual - Manual (Page 28)

WaveStation 3000 Function and Arbitrary Waveform Generator
Gated Burst
This method sets a gate on the waveform to mark the burst period.
1. Generate a basic waveform .
2. Before outputting, press the Burst function button.
3. Press the Gated softkey until it is selected.
4. Enter the Start Phase value (in °) to define the starting point of the burst. The phase varies from 0° to
360°; the default setting is 0°. For an Arbitrary waveform, 0° is the first waveform point.
5. Choose either Positive or NegativePolarity.
6. Press the appropriate Output button to begin outputting the waveform.
22 922869 Rev B