How to add a new event to the event library – Agilent Technologies Wireless Network Optimization Platform E6474A User Manual
Page 105
Advertising
Use Your System
4
Agilent E6474A User’s Guide
105
How to add a new event to the event library
Follow these steps:
1 Configure a project with one or more devices.
2 Start the Add Event Wizard (refer to
Figure 82
Starting the Add Event Wizard
3 Select the Create Event button (
).
Figure 83
Create a new event button
4 Enter the name, description of the event.
5 Select the event data source.
Advertising