Agilent Technologies Wireless Network Optimization Platform E6474A - Manual (Page 3)

Agilent E6474A User’s Guide 3
Welcome to Agilent E6474A Wireless Network Optimization Platform
Thank you for choosing Agilent Technologies. In this User’s
Guide, you will find the instructions you need to set up the
hardware and begin using the software to take
measurements.
About this guide
This guide contains installation and operating instructions
for the Agilent E6474A Wireless Network Optimization
Platform software.
Additional information
This guide is designed to provide you with a smooth,
successful installation and setup. In addition to this guide,
the online help provides information on the user interface,
views, system panels and configuration, as well as in- depth
information about how to use the E6474A software. The
software also contains over two hours of video training
material that helps you get the most from the application.
See this chapter For this information
1 Get Ready A list of tasks to perform before you get started.
2 Install the Software Instructions for installing the E6474A software.
3 Set Up Your System Setup instructions and cable connections for each
component of your systems.
4 Use Your System • Powering up systems.
• Starting and using the software.
5 Get Results Fast • Using the online training demonstrations.
• Accessing and using online help.
6 Getting Assistance, If
You Need It • Getting telephone support.
• Frequently asked questions.
• Returning systems for service.
• Solving problems.
• Contacting customer support.
• Updating E645xC receiver firmware.