Agilent Technologies Wireless Network Optimization Platform E6474A - Manual (Page 150)

150 Agilent E6474A User’s Guide
C Specifications
Charger specifications
Battery disposal
When the battery is exhausted and/or ready for disposal,
dispose of it according to your country’s requirements.
Within the US, you may contact Rechargeable Battery
Recycling Corporation (RBRC) for disposal.
The RBRC seal on the nickel metal hydride battery pack
indicates that Agilent Technologies is voluntarily
participating in an industry program to collect and recycle
these battery packs at the end of their useful life, when
taken out of service within the United States. The RBRC
program provides a convenient alternative to placing spent
nickel metal hydride battery packs into the trash or
municipal waste stream, which is illegal in some areas.
For information on recycling the battery outside the US,
please check with your local Agilent sales office.
Power cable
The battery pack charger is equipped with a three- wire
power cable, in accordance with international safety
standards. When connected to an appropriate power line
outlet, this cable grounds the charger power supply case.
Various power cables are available to connect the charger
power supply to the types of AC power outlets unique to
specific geographic areas.
Item Description Specification
Part Number W1314-80016
Charger Input Voltage 100-230VAC 1.5A 50-60Hz
Charger Output Voltage nominal 24VDC, 2.5A max