Agilent Technologies Wireless Network Optimization Platform E6474A - Manual (Page 136)

136 Agilent E6474A User’s Guide
A Safety and Regulatory Information
Installation, Use, and Storage
WARNING
If this product is not used as specified, the protection provided by the
equipment could be impaired. This product must be used in a normal
condition (in which all means for protection are intact) only.
No operator serviceable parts are inside this system. Refer servicing
to a qualified Agilent Technologies, Inc. service center. To prevent
electrical shock, do not remove the covers.
To prevent electrical shock, disconnect the equipment from mains
before cleaning. Use a dry cloth or one slightly dampened with water
to clean the external case parts. Do not attempt to clean the receiver
internally.
CAUTION
The Agilent 645xC and W1314A digital receivers are designed for use
in INSTALLATION CATEGORY II and POLLUTION DEGREE 2, per IEC
61010-1 and 664 respectively.
Enclosure protection IP40 according to IEC 529.
Install the system according to the enclosure protection provided. This
system does not protect against the ingress of water. This instrument
protects against entry of solid foreign objects greater than, or equal to,
one millimeter.