Agilent Technologies Wireless Network Optimization Platform E6474A - Manual (Page 15)

Installing the Software 2
Agilent E6474A User’s Guide 15
Install the E6474A software
Follow these steps.
NOTE
Version 11.0 onwards of the Agilent E6474A software requires Software
and Support Update Service (SUS) Licenses. Data logging can not be
performed without a valid SUS license.
CAUTION
For reliable operation of the Agilent E6474A application it is
recommended that you defragment your hard-drive before installation.
The Agilent E6474A application can integrate with many external
devices which provide large amounts of data, therefore efficient disk
access is important for optimal performance.
CAUTION
Vista OS - It is recommended that you switch off the User Account
Control option to enable all the features of the E6474A application.
Do This Notes
1 Insert the Agilent E6474A CD. This CD contains the required
software device drivers.
2 Your system may have autostart or go to
the Start button, click Run and type D:\
setup (where D is your CD drive).
The installation dialog box
appears. Refer to
Figure 1 .
3 Follow the installation instructions.
4 Select the Agilent E6474A-X installation
option.