Connecting cables to the pdm – Agilent Technologies Wireless Network Optimization Platform E6474A User Manual
Page 187
Advertising
Permanent In-Vehicle Hardware Installation
D
Agilent E6474A User’s Guide
187
3 Drill the holes, using a 5/32” (5.5mm) drill bit, or the
metric equivalent that accommodates the screw.
4 Attach the PDM to the vehicle, using the hardware
provided.
Figure 115 Installing the PDM
Connecting Cables to the PDM
A standard configuration for the PDM includes the following
cables. Refer to
Figure 116
on page 188.
82.57 mm
199.6 mm
Advertising