Agilent Technologies Wireless Network Optimization Platform E6474A - Manual (Page 91)

Use Your System 4
Agilent E6474A User’s Guide 91
5 Select the Layer Properties button to open the layer
properties dialog box. This dialog box is used to modify
the added layers to best suit your map display needs
(
Figure 65 ).
Figure 65 Loaded and configured map
More information on the Layer Properties dialog box and
how to manage your maps can be found in the online help.
To add data items to your map
Once you have added your map(s), you will need to select
measurements to plot on the map as you drive- test your
network.
Click here to open the
layer properties dialog
NOTE
You may experience performance issues if you try to plot too many data
items on the map. As a general guideline, four measurement results, with
offsets, on a single map is a recommended amount of items, although the
map does support plotting many more if required.