IEI Integration RPC-6106_6108 - Manual (Page 26)

RPC-6106/6108 Rackmount LCD Workstation
4.1 Installation Considerations
4.1.1 Installation Precautions
When installing the RPC-6106/6108, please follow the precautions listed below:
Read the user manual: The user manual provides a complete description of
the RPC-6106/6108 Rackmount LCD Workstation, installation instructions
and configuration options.
Turn Off Power: When installing the RPC-6106/6108 Rackmount LCD
Workstation, make sure the power is off. Failing to turn off the power may
cause severe injury to the user and/or damage the system.
Certified Engineers: Only certified engineers and technicians should install
and modify the RPC-6106/6108 Rackmount LCD Workstation. Non-certified
engineers or technicians should not attempt to install the RPC-6106/6108
Rackmount LCD Workstation.
Mounting: The RPC-6106/6108 Rackmount LCD Workstations are heavy
devices. When rack mounting the RPC-6106/6108 Rackmount LCD
Workstation, please ensure that at least two people are assisting with the
procedure.
Anti-static Discharge: Electronic components like CPU cards and
backplanes must be installed into the RPC-6106/6108 Rackmount LCD
Workstation. Follow proper grounding procedures before installing these
components.
4.1.2 Installation Prerequisites
Prepare the following before installing the RPC-6106/6108 Rackmount LCD Workstation:
Completely installed CPU card: The RPC-6106/6108 Rackmount LCD
Workstation CPU card is separately purchased. Before installing the
RPC-6106/6108 Rackmount LCD Workstation, a CPU card should be
properly installed. The following components may also have to be installed
(refer to the user manual that came with the CPU card):
o CPU
o Heatsink and cooling fan
Page 16