IEI Integration RPC-6106_6108 - Manual (Page 33)

RPC-6106/6108 Rackmount LCD Workstation
WARNING:
Failure to follow the installation procedures outlined in this section may
cause severe damage to the RPC-6106/6108 Rackmount LCD
Workstation. Please follow the installation instructions carefully.
4.5.1 Remove the Top Cover
The top cover is secured to the RPC-6106/6108 Rackmount LCD Workstation with six
screws (three each on the left and right panels). To remove the top cover, please follow
the steps below.
Step 1: Remove the six top cover retention screws (three each on the left and right
panels). (See Figure 4-1)
Figure 4-1: Top Cover Retention Screws
Page 23