3 installation steps, 5 installing components into the rpc-6106/6108, Nstalling – IEI Integration RPC-6106_6108 User Manual
Page 32: Omponents into the, Rpc-6106/6108
Advertising
RPC-6106/6108 Rackmount LCD Workstation
4.4.3 Installation Steps
Complete the following steps to properly install the workstation:
Step 1:
Open the top cover.
Step 2:
Remove the disk drive bracket.
Step 3:
Install the disk drives.
Step 4:
Reinstall the disk drive bracket with the installed disk drives.
Step 5:
Install the backplane.
Step 6:
Install the CPU card.
Step 7:
Install the PCI or ISA expansion cards (optional).
Step 8:
Connect all required cables.
Step 9:
Close the top cover.
Step 10:
Mount the workstation.
Step 0:
4.5 Installing Components into the RPC-6106/6108
NOTE:
This section gives a generic description of the component installation
process for the RPC-6106/6108 Rackmount LCD Workstation.
Page 22
Advertising