IEI Integration RPC-6106_6108 - Manual (Page 69)

RPC-6106/6108 Rackmount LCD Workstation
7.2 Driver Installation
To install the touch screen software driver, please follow the steps below.
Step 1: Insert the TouchKit driver CD that came with the RPC-6106/6108 rackmount
workstation into the CD drive.
Step 2: Once the CD drive is installed, the screen in Figure 7-1 appears.
Figure 7-1: Driver CD Pop Up Screen
Step 3: Select the operating system installed on the system from the menu on the left
side of the screen.
NOTE:
The following description is for driver installation using a Windows 2000 OS. If a
different OS is installed, please refer to the driver user manual for the relevant
OS. The driver user manuals can be accessed by selecting “User Manual”
from the menu on the left side of the “Driver CD Pop Up Screen”.
Page 59