IEI Integration RPC-6106_6108 - Manual (Page 38)

RPC-6106/6108 Rackmount LCD Workstation
Step 2: Mount the backplane into the chassis. Make sure the backplane is positioned so
that when the CPU card and PCI/ISA expansion cards are installed, both the
CPU card and the PCI/ISA card I/O connectors face the I/O brackets on the front
panel.
Step 3: Align the retention screw holes in the backplane with the copper pillars installed
in Step 1.
Step 4: Insert retention screws to secure the backplane to the chassis (Figure 4-5).
Step 0:
Figure 4-5: Backplane Retention Screws
4.5.6 Install the CPU Card
CAUTION:
Before a CPU card is inserted into the backplane, make sure the CPU
card has been correctly prepared and that all the CPU card jumper
settings are configured correctly. For CPU card component installation
procedures, please refer to the user manual that came with the CPU
card.
Page 28