5 psu replacement, 5 psu r, Eplacement – IEI Integration RPC-6106_6108 User Manual
Page 53: Figure 5-1: psu external retention screws
RPC-6106/6108 Rackmount LCD Workstation
Step 9:
Close the back cover of the workstation and reinstall the workstation into the
cabinet or rack in which it was previously installed. Refer to Section 4.6 for
complete mounting instructions.
Step 0:
5.5 PSU Replacement
To replace a PSU, please follow the instructions below.
Step 1:
Turn off and disconnect the workstation from all power sources.
Step 2:
Remove the workstation from the rack in which it is installed.
Step 3:
Open the top cover of the RPC-6106/6108 Rackmount LCD Workstation. (See
Step 4:
Disconnect all the PSU cables from their devices.
Step 5:
Remove the four external retention screws that secure the PSU assembly to the
rear panel of the workstation (Figure 5-1).
Figure 5-1: PSU External Retention Screws
Page 43