3 packing list – IEI Integration RPC-6106_6108 User Manual
Page 28
RPC-6106/6108 Rackmount LCD Workstation
Step 1:
Use box cutters, a knife or a sharp pair of scissors to open the top of the external
(second) box.
Step 2:
Open the external (second) box.
Step 3:
Use box cutters, a knife or a sharp pair of scissors to open the top of the internal
(first) box.
Step 4:
Lift the workstation out of the boxes.
Step 5:
Remove both polystyrene ends from each side.
Step 6:
Pull the plastic cover off the workstation.
Step 7:
Make sure all the components listed in the packing list are present.
Step 0:
4.2.3 Packing List
NOTE:
If some of the components listed in the checklist below are missing, please do
not proceed with the installation. Contact the IEI reseller or vendor you
purchased the RPC-6106/6108 from or contact an IEI sales representative
directly. To contact an IEI sales representative, please send an email to
.
When the RPC-6106/6108 Rackmount LCD Workstation is received, make sure all the
components listed below are present.
Page 18