ATTO Technology 2400C/R/D - Manual (Page 7)

2
• SFP FC connector
• Support for direct connect to F-port fabric
switches, full duplex FC data transfers and FC-
AL, PLDA and public look login
• Two independent Ultra320 SCSI buses
• Dual-stacked VHDCI SCSI connectors
• Backward compatible with all single-ended SCSI
devices and all previous SCSI protocols
• Manual and auto SCSI device mapping
• 215 MB/sec. maximum throughput
• ExpressNAV
integrated management console
for remote configuration, management and
diagnostic capabilities
• Supports SCSI hard disk drives, tape drives and
CD libraries
ATTO FibreBridge 2400C/R/D features, benefits
The ATTO FibreBridge 2400C/R/D is a 4-Gigabit Fibre
Channel-to-SCSI bridge configured with dual
independent 4-Gb Fibre Channel ports and dual-
stacked Ultra320 SCSI buses featuring VHDCI
interfaces.
Designed to integrate industry-leading performance
and SAN capabilities into future generation storage
solutions, the FibreBridge 2400 uses a high
performance architecture suited for tape automation
OEMs who wish to integrate high performance tape
drives into 4-Gb Fibre Channel SANs, as well as disk
OEMs looking to add 4-Gb Fibre Channel connectivity
to their disk storage devices.
• Two independent 4-Gb Fibre Channel ports
which auto-negotiate to 1-Gb, 2-Gb or 4-Gb
Fibre Channel
• SFP FC connectors
• Support for direct connect to F-port fabric
switches, full duplex FC data transfers and FC-
AL, PLDA and public look login
• Two independent Ultra320 SCSI buses
• Dual-stacked VHDCI SCSI connectors
• Backward compatible with all single-ended SCSI
devices and all previous SCSI protocols
• Manual and auto SCSI device mapping
• 440 MB/sec. maximum throughput
• ExpressNAV
integrated management console
for remote configuration, management and
diagnostic capabilities
• Supports SCSI hard disk drives, tape drives and
CD libraries